Quote:
Originally Posted by 68 Four on the Floor
stepside box lol. When i removed the leaf spring brackets from my frame I used a 4 inch flap wheel on my dewalt to grind off the rivet heads then used and air hammer to drive out the remainder.
|
Ah-ha! Makes sense now, I was tired when I read it. lol Truth be told I like fleetside beds more, but I am going to keep this one stock "appearing" at the least.
I am grinding an X into the head and then pushing them out with a air hammer, It's just real tough under the truck with all the sheet metal in the way. Not to mention all the dust, dirt, and metal shavings.
