|
Re: Doing LS Swap - I have no idea what I'm doing!
Quote:
Originally Posted by EagleChief
I took a look at my harness last night. It does have a grommet on the main harness to allow for entry through the firewall. Maybe there is enough wire there to mount inside the cab? I'm lost at electrical stuff. Luckily, the guy I dealt with labeled every connection and wire on the harness. The harness was made by PSI Conversion. Everything is already covered in wire loom and ready to go. I just have to figure out where to start as far as hooking things up and running the wires.
|
Find the area of the harness with the coil and injector connectors. Make sure you have them on the correct sides and then just kind of lay the harness there. then move wires around seeing where they go and just have it kind of where it's going, then make adjustments accordingly.
__________________
71 c-10 Long Bed, under the knife for a No Limit Engineering Wide Ride Chassis Pack and coil over static drop.
07 Silverado Classic 2wd
95 Camaro 427SBC/TH350
|