View Single Post
Old 07-07-2014, 11:39 PM   #132
ls1nova71
Registered User
 
ls1nova71's Avatar
 
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,118
Re: LS factory cruise control hook up

I would be looking for a '99-'02 truck cruise module since it would be a direct replacement. Full size vans from '03-'07 will have them too. Astro vans and S10's may be more plentiful though, but you may have to change the end that hooks to the throttle body.

As for checking the switch, you would need a test light, a battery and some wire to test it at the end that plugs into the pigtail. Basically what you would be doing is hooking power to one of the terminals and the test light to another and then going through the switches to make sure they work (light comes on). I have a pigtail wired up with three light bulbs that I use to test them when I get done putting them together, but that's probably more hassle to go through to just test one switch.
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html

5.3 swap into my RUSTY '71 C10
http://ls1tech.com/forums/conversion...71-c-10-a.html
ls1nova71 is offline   Reply With Quote