[BlakeW]

I ended up taking the body lift off and realized that the motor didn't fit right because the previous owner put the motor mounts in the I6 holes, not the holes set about 2 inches forward for the V8's. I quit on the project over the winter for snowmobiling and now I'm back at it again.

Should I reinstall the body lift with new bolts or move the drivetrain forward the extra 2 odd inches? I'm siding on the body lift and putting a 3 inch suspension lift in instead of the heavy duty 6" lift I have in now that rides pretty bad.

Here is the progress I've made in the past 2 days. Also, here's a bullet hole I found in the cab.