[smokedat]

so i got the harness and i made an aluminum mount from materials i had laying around, some 1/4 angle with a 1/4 flat bar with some spacers to kik it out. I installed it conveniently on the left side of the column more or less where the original location is. i still need to drill and route the wires to their locations, and i will also be making a 12 source fused block with 12 relays for the pcm and accessories related to swap only, i wont be utilising all 12 but i rather have the option, so the truck wiring will be seperate from the LS swap accessories. I will post more on this later as i am still piecing together this set up.