The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Starting 1966 Factory Short Bed Build, Bagged, 383 Stroker and Muncie M20 4-Speed

88Stanger · 10-03-2022, 10:58 AM

Ok, Update for this past weekend.
After getting back late Friday from Las Vegas and a recuperation period I started to look into the Exhaust for the truck. Here is what I am dealing with and what I have planned to work.
First few pics are of the front end and the two types of bump stops, ones that came with lower arms and then Energy Suspension ones I installed. The black ones are really soft and will distort when all the air is out of the bags and it is on them, where as the redo ones are stiffer and i prefer.

10-03-2022, 10:58 AM	#744
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,644	Re: Starting 1966 Factory Short Bed Build, Bagged, 383 Stroker and Muncie M20 4-Speed Ok, Update for this past weekend. After getting back late Friday from Las Vegas and a recuperation period I started to look into the Exhaust for the truck. Here is what I am dealing with and what I have planned to work. First few pics are of the front end and the two types of bump stops, ones that came with lower arms and then Energy Suspension ones I installed. The black ones are really soft and will distort when all the air is out of the bags and it is on them, where as the redo ones are stiffer and i prefer. Attached Images __________________ John 3:16 - Saved me... God Bless