The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

grennberet02 · 01-03-2012, 01:25 PM

Started my LS swap and the 98 camaro exhaust manifolds did not fit using the transadapt plates and the stock motor mounts.
I may be using shorty headers instead for the exhaust set up.
Plenty of room near the rear of the motor.
I broke one of the rear coils as it hit the brake booster. (accident)
You may think of removing these before installing.
I used a Poly mount with a single stud in the middle and only had to move the engine mount to the rear using one of the existing holes.
The drive shaft will need to be shortened. Using one from a burb.
Just wanted to add this to the list.

Thank you,

Luis G.

01-03-2012, 01:25 PM	#174
grennberet02 Registered User Join Date: Jul 2011 Location: Austin,Tx Posts: 3	Re: LS engine swap info Started my LS swap and the 98 camaro exhaust manifolds did not fit using the transadapt plates and the stock motor mounts. I may be using shorty headers instead for the exhaust set up. Plenty of room near the rear of the motor. I broke one of the rear coils as it hit the brake booster. (accident) You may think of removing these before installing. I used a Poly mount with a single stud in the middle and only had to move the engine mount to the rear using one of the existing holes. The drive shaft will need to be shortened. Using one from a burb. Just wanted to add this to the list. Thank you, Luis G.