Re: Lss3
I finally figured out the top radiator hose. It’s made from two hoses and a coupler. The neat thing about the coupler is that it has a 1/8” pipe fitting intended for a temperature gage, but I’m going to use it for the steam port. The engine side hose is from a 2010 Camaro (AC Delco 22736M) The Radiator side is from a 2002 Chrysler Voyager 3.3 liter (PN 72044). Thanks conman585 for the recommendation. The coupler is a 34mm unit from UPGR8 Racing (U8301-3404). The steam fitting an 1/8” NPT X ¼” hose barb from Earl’s Performance (AT984204ERL).
|