[BadAzz70PU]

Your in luck, My truck has leaf rear and coil front. I used the flip in the rear and 3" dropped coils up front. The back went down a total of 6 inches with the flip. I had to notch the frame. Some people may say you dont need to do it but my rear hit the frame on cracks in the road before I notched it. I made the flip kit on my own for about $40. I got some scrap 1/4" steel from a local grinding shop and bought the axle purches and U-bolts. I boxed in the frame on the open side. I then put a U piece in the part that I cut out. Seems to be holding up well for almost 2 years now. I have to go check it out again when I get home. Here are some pics of it, email me if you have any questions. Good Luck.




Go to my web site http://www.low70.com for more pics

------------------
1970 C10 LWB
-Worked 350
-Dropped
-Tangier Orange Paint
Visit my Web Site: www.low70.com
College student at Clemson (SC)
Home in Langhorne Pa