So my helper hates a photo, no matter why.
Still, fooled her.
The old seatbelt mounts were attached at the same points as the roll bar rear mounts.
They were rotten and needed to come out, so I crawled underneath and let Sally drive the 3 foot breaker bar and about 5 extensions.
Got them, and the rotten carpet and under felt out.
Then cleaned up again, how many times have I cleaned this out.
Other way.
Looking at the base, behind the seats, where the seatbelt mounting nuts are welded in, it became apparent that this was not a safe place, and my newly bent and laid out roll bar would be a good idea.
But first a bit of fun.
I had enough of doing the real job of cleaning and prepping.
There would be more to come.