I know I'm slow as I really only get to work about 12 hours a week on the Blazer, but man, installing this trim is taking WAY longer than I expected!!
I also learned that the 2-sided tape that ships with the trim from LMC is absolute junk. Even using adhesion promoter the side pieces were still falling off. I went to Home Depot and grabbed some 3M Extreme Bond tape and so far so good! Worst part is getting the old tape off of the clips on the trim. I've been using a razor blade and adhesive remover to get them off but it's a slow process.
Here is where I'm at after about 5 hours of work so far... I'd say the only thing saving my back is our 4 post lift! Being able to set the truck at a height you can drill and work standing straight up is a life saver!!
