The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - HG's Dream Car Build

hgs_notes · 10-27-2022, 08:48 PM

I pick up the new flywheel bolts and get that on. Then my pressure plate bolts don't fit. Well sort of. After another try with different bolts I found that two of the six holes had messed up threads. I was able to get a tap through one and it was okay. The other one had to be drilled out and a helicoil installed. Another stop by the store.

10-27-2022, 08:48 PM	#119
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,112	Re: HG's Dream Car Build - Shelby Cobra Kit I pick up the new flywheel bolts and get that on. Then my pressure plate bolts don't fit. Well sort of. After another try with different bolts I found that two of the six holes had messed up threads. I was able to get a tap through one and it was okay. The other one had to be drilled out and a helicoil installed. Another stop by the store. Attached Images __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff Last edited by hgs_notes; 10-28-2022 at 07:00 PM.