Quote:
Originally Posted by tdave00
Any info on your "adjustable track bar"? Did you just cut the factory one in two and thread it on each side? Got a part number or place where you bought the thing that joins them together?
Pretty good idea btw. After seeing what you did I am thinking of cutting the rivets out of the frame mount and adding a spacer so it drops down more and use your idea on the track bar.
|
There is more info on it here:
http://67-72chevytrucks.com/vboard/s...d.php?t=347169
I took about 2" out of the bar. Had it threaded about 3" on each end. I bought the part through summitracing.com and they come in packs of 2. You can by the OEM style as singles and it should work just fine. The tie rod adjusters for our trucks will work, they are a fairly common size for many cars. When I didn't see my truck as an application for the edelbrock adjuster, I looked up the vehicles that the cheapest set did fit, then went to the napa site and looked up the OEM style part for that vehicle and found the specs there were the same diameter and thread count, just a fraction of an inch different in length.