The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**lawest** · 01-26-2016, 10:27 PM

Mark the cut out using the template with the Old Aire kit, drill around the perimeter with a 1/2" drill bit.

Name: 100_0982.jpg
Views: 1636
Size: 34.3 KB

Use nibbling tool to remove remaining metal right up to the mark and finish smoothing with a file.

Name: 100_0983.jpg
Views: 1224
Size: 36.5 KB

Name: 100_0993.jpg
Views: 1220
Size: 38.2 KB

Name: 100_0992.jpg
Views: 1531
Size: 42.4 KB

01-26-2016, 10:27 PM	#36
lawest Registered User Join Date: Jan 2008 Location: Tuttle, OK Posts: 205	Re: cutting holes for factory AC vents Mark the cut out using the template with the Old Aire kit, drill around the perimeter with a 1/2" drill bit. Use nibbling tool to remove remaining metal right up to the mark and finish smoothing with a file. __________________ 69 K10 SWB Project Dream '69 2011 K2500 Silverado Beat to fit, Paint to match Dream '69 Build Thread