The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**HO455** · 09-15-2023, 04:00 PM

After photos of applying the fiberglass. The last photo is of the outside of the box where the hole was. I ended up with 2 air bubbles or voids in the resin. I had to grind them out in preparation for the next step.

The 3rd photo shows how extensive the damage was. It didn't seem so bad when I first started cleaning but by the time I was done with preparing the area for repair it revealed that there was actually a 1/2" by 2" piece that was loose and could have been easily removed. Getting the resin into the cracks along with the mat and resin on the inside fused the pieces of the box back together.

09-15-2023, 04:00 PM	#1019
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 10,867	Re: Working Man's Burbon After photos of applying the fiberglass. The last photo is of the outside of the box where the hole was. I ended up with 2 air bubbles or voids in the resin. I had to grind them out in preparation for the next step. The 3rd photo shows how extensive the damage was. It didn't seem so bad when I first started cleaning but by the time I was done with preparing the area for repair it revealed that there was actually a 1/2" by 2" piece that was loose and could have been easily removed. Getting the resin into the cracks along with the mat and resin on the inside fused the pieces of the box back together. Attached Images __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377