Re: Adding an AM/FM Decal
5. Looking down into the radio as it lays flat right side up, you will see two sheet metal screws-one on the left side, and one on the right side of the radio dial drum housing. Carefully remove each of these screws. You will need to move the radio station from one left, then to the right in orider to allow enough room to access the screws. Be careful not to let the screws fall into the radio. The sheet metal screw on the left has a skinny, flat piece of metal that rests on the dial indicator. Study its resting position before removing so you are confident when it comes time to reinstall the screws.
__________________
2018 Chevy Crew Cab
2006 Impala SS
1965 Plymouth Sport Fury
1970 Chevy Longhorn - Bucket Seats
- Shoulder Belts
- Front Tow Hooks
- Factory Air
- Factory Speedwarning, Tach & Vaccum
- Factory Tilt
- CST Package
- AM/FM Radio
- Bumper Guards
Richard
70 Longhorn CST Build
Adding an AM/FM Decal
|