The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 55.2-59 1957 Chevy Pickup inside door panel fastener issue

1project2many · 09-07-2021, 02:12 PM

You may be able to install a Nutsert into that opening. Nutserts are like rivets and are threaded internally to accept a bolt. You might also weld a nut to a piece of flat steel then pop rivet the steel to the inside of the door. That section is under the door panel, yes? So it's not visible when the panel is installed?

09-07-2021, 02:12 PM	#3
1project2many Registered User Join Date: Mar 2012 Location: Lakes Region NH Posts: 3,158	Re: 1957 Chevy Pickup inside door panel fastener issue You may be able to install a Nutsert into that opening. Nutserts are like rivets and are threaded internally to accept a bolt. You might also weld a nut to a piece of flat steel then pop rivet the steel to the inside of the door. That section is under the door panel, yes? So it's not visible when the panel is installed?