The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

19723DR · 02-13-2010, 01:15 AM

tonight I pulled the front bag brackets out. Tomorrow I need to cut the upper bag brackets down. I put 2X4's back in between frame and the lower A arms to prevent damage to the tie rods. I still might notch the frame to make room for the tie rods. I also need to modify the exhaust pipe. That's going to be a challenge with the 5 speed trany.

For the rear I was looking a Ekstensive Metal Works 2 link. The kit comes with everything but bags.

https://www.ekstensive.com/store/pro...728924089666e5

02-13-2010, 01:15 AM	#45
19723DR Registered User Join Date: Oct 2007 Location: Salt Lake City Posts: 628	Re: Project ''Second Time Around'' tonight I pulled the front bag brackets out. Tomorrow I need to cut the upper bag brackets down. I put 2X4's back in between frame and the lower A arms to prevent damage to the tie rods. I still might notch the frame to make room for the tie rods. I also need to modify the exhaust pipe. That's going to be a challenge with the 5 speed trany. For the rear I was looking a Ekstensive Metal Works 2 link. The kit comes with everything but bags. https://www.ekstensive.com/store/pro...728924089666e5 __________________ 72 Suburban 3 Door http://67-72chevytrucks.com/vboard/s...d.php?t=265728 family fun cruiser 71 Cheyenne Project http://67-72chevytrucks.com/vboard/s...d.php?t=299232 Almost finished 93 Silverado http://www.67-72chevytrucks.com/vboa...d.php?t=378258 Flamed, bagged, body dropped on 22's 98 Chevy short bed DD 97 Z71 3 Door 51 Suburban-S-10 swap "What other hot rod can you carry 7 of your friends in"