[tim71]

I need 2 of the rear axle plates that sit under axle, the axle u bolts go through plate and secure axle to leaf springs.

Needed for a 1972 Blazer. I'm sure all half ton K trucks use this attaching plate.
Good chance 2WD trucks with leaf springs use the same plate.

PO lifted Blazer and changed axle/leaf spring setup. The u bolts are supposed to face down. PO added lift blocks and a round u bolt that faced up. The improper plate on Blazer is on top of the leaf springs and is incorrect.

I'm attaching a photo of the correct attaching method and you can see the plate under the axle...I need 2 of these. Thanks for any help.