The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 73-87 2wd lift with 33x10.5x 18 Nittos

Justins76 · 02-15-2011, 12:11 AM

Got it aligned. They used almost no shims but got it in spec. I had to change how the brake hose attached to the control arm because it was pulling tight on turns. Also had to trim the fender at the front because of the tread rubbing going over bumps with the wheels turned. With my digital level, I get about .1-.2° angle down in the front. Ride is smooth on the freeway and curbs are easier to hop

Some dimensions with a tape measure.

02-15-2011, 12:11 AM	#5
Justins76 OutOfMyMind & I'llNeverKnowWhy Join Date: Apr 2004 Location: Another world, some other time Posts: 672	73-87 2wd lift with 33x10.5x 18 Nittos Got it aligned. They used almost no shims but got it in spec. I had to change how the brake hose attached to the control arm because it was pulling tight on turns. Also had to trim the fender at the front because of the tread rubbing going over bumps with the wheels turned. With my digital level, I get about .1-.2° angle down in the front. Ride is smooth on the freeway and curbs are easier to hop Some dimensions with a tape measure. Attached Images __________________ -Justin-Out of my mind and I'll never know why 1976 Chevrolet Silverado C10 350 4bbl / TH350 Big10 longbed 1986 Pontiac Firebird T-Top 5.0L TPI 700R4 WS6 1992 Pontiac Firebird T-Top 5.0L TBI 700R4 My cardomain page I don't like to save, it's more fun to spend!!