The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Anti-Window Rattle Seals

**Rich72C10** · 03-31-2024, 02:04 PM

If you have a '72, it is a must to loosen that Phillips screw under the vent window or you can't push that end of the chrome just to the glass. The thing is, that little bit of chrome (where the rubber has been snipped) over laps the chrome edge of the vent window.

To me it looks a little weird / kludgey. Here's a photo, hope it helps.

03-31-2024, 02:04 PM	#37
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,643	Re: Anti-Window Rattle Seals If you have a '72, it is a must to loosen that Phillips screw under the vent window or you can't push that end of the chrome just to the glass. The thing is, that little bit of chrome (where the rubber has been snipped) over laps the chrome edge of the vent window. To me it looks a little weird / kludgey. Here's a photo, hope it helps. Attached Images __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim