10-30-2020, 01:38 PM
|
#12
|
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: Brother's Tach
Well I started yesterday taking the tach back out of the ramp truck to install the new one that Brothers sent me. I got everything back in and the tach I hooked a 3amp fuse in line to it off the unfused terminal of the fuse block.
It's working good, so now I'm looking and turning everything on to make sure it's all working. No dash lights and with the head light switch pulled out the turn signal although they are working the dash lights are backwards. Yes you read that correctley. They are backwards with the head light switch pull out but work normal without the lights on!
So I pull it back out and found that the printed circuit board ground has a gash right beside the bulk head connector. I ran a ground wire from one of the light bulbs to the back of the cluster to ground it. So far so good everything is back to working correctly.
https://www.youtube.com/watch?v=fPrq2X1JHlI
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71
Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour
http://upstategmtrucks.com/
Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!
LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
|
|
|