The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Another way to skin the cat; the High Torque 292 LS swap

**mongocanfly** · 05-18-2015, 08:07 PM

Nice way to "skin that cat"
Beetle..on the steam ports my engine guy said I didn't need them so I cut off all the tubing and welded up the banjo ends and bolted em back to the heads.if you look at his post #11 in the last pic you can see the tube going across the front of the intake and into the water pump.my 6.0 didn't plumb into the pump it went to the radiator and not having a fitting there I chose to block it off.

05-18-2015, 08:07 PM	#65
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,594	Re: Another way to skin the cat; the High Torque 292 LS swap Nice way to "skin that cat" Beetle..on the steam ports my engine guy said I didn't need them so I cut off all the tubing and welded up the banjo ends and bolted em back to the heads.if you look at his post #11 in the last pic you can see the tube going across the front of the intake and into the water pump.my 6.0 didn't plumb into the pump it went to the radiator and not having a fitting there I chose to block it off.