Hey guys, I just got new axle/wheel seals (Timken 2081)
https://www.amazon.com/Timken-2081-S...omotive&sr=1-1
There is a flat side and the other side has a slight bevel at the inner diameter near the rubber seal. My question is: Is there an inside and outside to these. There's no markings to indicate such but the rubber seems to be angled or biased to one side (the side with the slight bevel) and I'm not certain if that goes in toward the differential or not. I believe that when I press it in, I should be looking at the flat side of the seal. Would that be correct? Thanks