Re: LS engine swap info
There is something to consider if you get a whole truck. I'm pulling the 6.0 and trans from an 03 K2500 right now. I spent the whole weekend and still don't have it out. What an SOB to pull everything. They knitted the power train together with all the wiring and plumbing. Everything that runs to one thing is routed through and restrained to 3 other parts of the vehicle. You can't pull the engine and trans together unless you pull the front diff. The exhaust is in the way of everything. You have to pull the intake to get enough clearance to lift the engine and be able to get at the top bell housing bolt. A 2WD would be a bit easier. If I did this again I'd pull the body off first. It would be easier.
__________________
Saskatoon, Saskatchewan
Canada
|