The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

litew8 · 10-16-2011, 02:39 AM

Installing the intake -

Tackeling the (front) frame before dropping the block/transmission (after lines).
Proper breathing apparatus and ventilation used and recommended.

Coat 1 complete, moving onto the 2nd coating -

Finished. Will hit the underside with rubber in a can before engine/transmission.

Real quick...
Pan/transmission before -

After -
First coat Zero Rust Red for oil pan (second coat will be a black of a different product) -

Cast

south side!

10-16-2011, 02:39 AM	#101
litew8 Registered User Join Date: Jul 2011 Location: Des Moines, Iowa Posts: 3,016	Re: Project "My Happy Mess" Installing the intake - Tackeling the (front) frame before dropping the block/transmission (after lines). Proper breathing apparatus and ventilation used and recommended. Coat 1 complete, moving onto the 2nd coating - Finished. Will hit the underside with rubber in a can before engine/transmission. Real quick... Pan/transmission before - After - First coat Zero Rust Red for oil pan (second coat will be a black of a different product) - Cast south side! __________________ project: "my happy mess" Last edited by litew8; 10-16-2011 at 02:47 AM.