|
Re: Engine turns over kinda slow?
I would check all your POS + connection to make sure there good and clean making good connections.
Oh and check the Fusible links to make sure there not corroded .
Then the NEG - connection to make sure there good and clean making good connections.
With the truck running I would make sure the ALT putting out the right amount power to the batt.
If the ALT check out good, see if the starter is pulling to mush load on the batt. Maybe the starter got an on off short inside. You can take your starter to big store like pet boys whatever in your area free test if you’re not sure about the ALT they do them too. Or maybe the store you got them from if they do test for them.
__________________
 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed
Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.
|