The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

jhaymon · 07-02-2012, 07:50 PM

2wd s-10 and Sonoma (other than extreme or zq8)" came with 15x8.5 aluminum or 15x7 steel with a 0 offset (4" backspace) with a 5 on 4 3/4 or 120.65mm lug pattern. a 16X8 with -6 to a +10mm offset is very doable. and thats with the limitations of an s-10 body. i run a 10x16 with a 6" backspace on the back and 8.5x16 with a 5" on front on the back on little s-10 with no issues. I physically lowered mine 3" from factory in the front and im sure that v8 drops it at at-least another inch so you should be fine.

ild imagine with all the room in the 41 wheel wells you could get 10s all the way around as long as you watch your offset.

07-02-2012, 07:50 PM	#2
jhaymon Registered User Join Date: Jun 2012 Location: southeast texas Posts: 210	Re: Wider steelies for my s10 frame 2wd s-10 and Sonoma (other than extreme or zq8)" came with 15x8.5 aluminum or 15x7 steel with a 0 offset (4" backspace) with a 5 on 4 3/4 or 120.65mm lug pattern. a 16X8 with -6 to a +10mm offset is very doable. and thats with the limitations of an s-10 body. i run a 10x16 with a 6" backspace on the back and 8.5x16 with a 5" on front on the back on little s-10 with no issues. I physically lowered mine 3" from factory in the front and im sure that v8 drops it at at-least another inch so you should be fine. ild imagine with all the room in the 41 wheel wells you could get 10s all the way around as long as you watch your offset.