The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - NP205 Stick Pivot Bolt. You Must Be Kidding…

**jeffahart** · 02-10-2023, 02:30 PM

I am currently using the JB bolt, it's a 9/16 on the threads, plus I had to use my own bushings. I use an aluminum advance adapters aftermarket transfer case adapter so the threads were larger than my stock cast iron adapter, it had 7/16(I'm pretty sure) Check the threads. I also have and non bushing bolt with a 9/16, but I like the bronze bushings better, it has a smooth action.

But, if Accelo makes one for you that the best answer/solution.

j

02-10-2023, 02:30 PM	#5
jeffahart Senior Member Join Date: May 2012 Location: Scottsdale, AZ Posts: 1,887	Re: NP205 Stick Pivot Bolt. You Must Be Kidding… I am currently using the JB bolt, it's a 9/16 on the threads, plus I had to use my own bushings. I use an aluminum advance adapters aftermarket transfer case adapter so the threads were larger than my stock cast iron adapter, it had 7/16(I'm pretty sure) Check the threads. I also have and non bushing bolt with a 9/16, but I like the bronze bushings better, it has a smooth action. But, if Accelo makes one for you that the best answer/solution. j __________________ White K20