[lunatic1968]

Squirrel.... Kinda. I wanted to tuck the front bumper on a bit. I was able to move it in a little more than a inch. I cut the frame horns at a angle, I might lose the middle lower bolt but that doesn't bother me too much, I might do something with it later. The out board bolts work fine after I move the hole back an inch or so on the frame. I will be using a painted bumper in the future but this cheap ass LMC chrome bumper works fine for mock up. The painted bumper will get all the mounting holes welded up with studs on the back in addition to dimple die holes across the upper part of the bumper, I think... that's the plan so far; to be able to get air flow to the air box.