The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 63-87 rack and pinion

Mondo · 07-16-2013, 09:04 AM

I have the 3in drop springs from CPP (and dropped spindles). Before the upgrade it had stock lower A-arm and tubular upper, it actually drove really well (see previous posts/pics). The ride height is the same so I don't anticipate a problem (we'll cut the bump stop in half)... just that I won't have a sway bar.
I think I have someone that can bend me a knew one..
Worst case, I go up an inch to 4/6

07-16-2013, 09:04 AM	#139
Mondo Registered User Join Date: Aug 2007 Location: Bakersfield, Ca Posts: 538	Re: 63-87 rack and pinion I have the 3in drop springs from CPP (and dropped spindles). Before the upgrade it had stock lower A-arm and tubular upper, it actually drove really well (see previous posts/pics). The ride height is the same so I don't anticipate a problem (we'll cut the bump stop in half)... just that I won't have a sway bar. I think I have someone that can bend me a knew one.. Worst case, I go up an inch to 4/6 Last edited by Mondo; 07-16-2013 at 09:10 AM.