I have my 325/35/22 tires in place. They are pretty big at 31" tall. Pictured is the min clearance I could get away with, about 3/8". Should have a bit more maybe. I don't really like the way they look from the outside. To far in. Thinking I will cut the box side flange back, to bring the tire farther out. Anyone do this? I'm thinking I would cut back to 1/4" and weld some 1/4 x 1/2 FB along the seam to make up for lost strength. I could then move the tire out another 1" or so and end up with 1/2- 5/8" clearance