Thread: 72 Plaid Sub
View Single Post
Old 11-25-2017, 01:08 PM   #39
Heliarcn
Registered User
 
Join Date: Nov 2013
Location: Las Vegas, Nevada
Posts: 376
Re: 72 Plaid Sub

Quote:
Originally Posted by Longhornss View Post
Hey, This looks great. I am going an LT in my 67 Long box and just decided to go to the V7 over my current V6 drop member based on your pictures from Instagram and the advice from Brandon over at PB. They are currently working on getting my order built and are working on a new set of Engine mounts. Curious to know what you did for mounts and what your plan is for Headers/Manifolds. I also got one of the first Holley LT pans but got Tied up is a SEMA project that pulled me away from my truck project. I wish I would have realized sooner that the V7 was going to be a better option for this engine package.

If there is anyone out there looking for V6 1' narrow Control arms I have a set for sale. Too bad I welded the drop member in could have sold it too.....

Anyway the truck looks great I will keep an eye out for updates.
Hey Longhornss,

I went with the Porterbuilt LS mounts and ICT Billet LS to LT adaptors. I did this because it raised the motor and trans to the proper elevation so the trans pan wasn’t lower than the frame rails. The 6L80E is a huge trans and just barely fit with the G8 pan. I will eventually talk to Porterbuilt about re-making the mounts so I don’t have to have the adaptors in there. As for the exhaust manifolds, I chopped the flange off the stock manifolds and welded a v-band flange on. This was a quick fix to get the suburban running and down to AZ for the Gitdown and Goodguys. I tried the 2016 Camaro tube manifolds, but they didn’t work with my steering. Passenger side was good, but the drivers side was no good. I will eventually make my own headers.

Bret
__________________
Bret


1972 Chevy Suburban
1976 Blazer
Heliarcn is offline   Reply With Quote