The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

19723DR · 05-31-2010, 10:38 PM

Long weekend. I spent some time running the rear air lines and cleaning the rest of the frame and rear end. I also cut the exhaust off the drivers side. I'm going to route it past the trany then Y into the cat. Started to weld the pipe, but ran out of wire. Saturday I bout some shackles for the rear. That should set the rear end on the bump stops. I still need to cut the center support out of the bed before I can put the bed back on.

05-31-2010, 10:38 PM	#85
19723DR Registered User Join Date: Oct 2007 Location: Salt Lake City Posts: 628	Re: Project ''Second Time Around'' Long weekend. I spent some time running the rear air lines and cleaning the rest of the frame and rear end. I also cut the exhaust off the drivers side. I'm going to route it past the trany then Y into the cat. Started to weld the pipe, but ran out of wire. Saturday I bout some shackles for the rear. That should set the rear end on the bump stops. I still need to cut the center support out of the bed before I can put the bed back on. __________________ 72 Suburban 3 Door http://67-72chevytrucks.com/vboard/s...d.php?t=265728 family fun cruiser 71 Cheyenne Project http://67-72chevytrucks.com/vboard/s...d.php?t=299232 Almost finished 93 Silverado http://www.67-72chevytrucks.com/vboa...d.php?t=378258 Flamed, bagged, body dropped on 22's 98 Chevy short bed DD 97 Z71 3 Door 51 Suburban-S-10 swap "What other hot rod can you carry 7 of your friends in" Last edited by 19723DR; 08-28-2010 at 10:58 PM.