The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 1991 Suburban Speed Hut Speedo install problem

ballencd · 05-16-2021, 04:15 PM

I got it fixed. Had to install a "pull up" resistor on the signal line for the speedo to work.
Name: IMG_3060.jpg
Views: 190
Size: 45.8 KB

Apparently when I pulled the factory dash I also pulled the pull up resistor. IT works great now. I still need to tilt all the gauges back so I can see them as the factory dash will not allow that. I am going to build a aluminum dash and reinstall the gauges. Name: IMG_3040.jpg
Views: 190
Size: 42.6 KB

Name: IMG_3040.jpg
Views: 190
Size: 42.6 KB

It might be hard to see in the photo but the gauges little toward the driver and make it hard to see them.

05-16-2021, 04:15 PM	#5
ballencd Registered User Join Date: Aug 2013 Location: Columbus, NC Posts: 81	Re: 1991 Suburban Speed Hut Speedo install problem I got it fixed. Had to install a "pull up" resistor on the signal line for the speedo to work. Apparently when I pulled the factory dash I also pulled the pull up resistor. IT works great now. I still need to tilt all the gauges back so I can see them as the factory dash will not allow that. I am going to build a aluminum dash and reinstall the gauges. It might be hard to see in the photo but the gauges little toward the driver and make it hard to see them. __________________ 1983 M35 (bobbed and converted to dump) 1988 Chevy Suburban (5.7TBI/TH700R4/NP208) 1991 Chevy Suburban (5.7TBI/TH700R4/NP241C) 2005 Toyota Matrix 2002 VW Passat (sold) (YEA!) 1986 M1009 (6.2/TH400/NP208) (sold)