progress... more loose ends no longer loose. got the front cap bolted in place, mocked the rad for hoses and such, drive shaft is installed, mounted some temp / presh gauges and cut all the metal for the raised wood floor.
looks a little better than the drawing huh:
the firewall green is much nicer when cleaned and some daylight hitting it
front cap lined up and bolted down
ugly gauges down on the column
the floor gap at the tailgate
the filler parts
inside it will look like stock, gunna run an L to support / bolt the front and rear ends of the wood. in the center its supported by the notch and bridge
till tomorrow, ill be welding in the floor supports along with final rad install and other loose ends.
thanks yall,
Yaril