The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

djracer · 11-28-2005, 02:04 PM

Jamie
Their is no problem running the power wire along the frame just be sure to use a grommet where you come into the cab! I would use a 8ga wire if you want to go ahead and run the power now with a inline maxi fuse close to the battery! If I was to ground the headunit in the rear you could run this ground with the rca's but I would only ground it up front or in the rear but not both! I use panasonic headunits all the time and rarely have any noise! I used to ground my headunits in the rear but I don't anymore!

Your junction box should be fine for your other acc.

11-28-2005, 02:04 PM	#12
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Car Audio Speaker Wiring Jamie Their is no problem running the power wire along the frame just be sure to use a grommet where you come into the cab! I would use a 8ga wire if you want to go ahead and run the power now with a inline maxi fuse close to the battery! If I was to ground the headunit in the rear you could run this ground with the rca's but I would only ground it up front or in the rear but not both! I use panasonic headunits all the time and rarely have any noise! I used to ground my headunits in the rear but I don't anymore! Your junction box should be fine for your other acc. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!