|
Re: Backyard Cummins
Before I get into the fun stuff, I wanted to get the rear fuel tank squared away. I basically had to relocate a crossmember to accommodate for the tank. The tank is a 30gallon steel tank, I forgot which one i ordered, but i know its a Chevy tank, possibly blazer. I will end up relocating the filler neck to the opposite side, because i want the recessed area on the lower portion of the tank to face the rear(More Clearance).
I do not own a welding machine. I ended up borrowing a Millermatic 211 from a friend. I will be using flux core for most of this job. I used 3/16" 2x4 for the crosmember, which i welded on the inside of the frame rail before boxing(boxed with 3/16" plate. I determined the location by setting the tank in place(Eyeball). I also installed a heavy duty tow receiver..
|