[fredscarryall]

also installed the gas tank,fuel pump and hard lines for the fuel.the only thing i have left is about a foot of line that goes to the carb.planning on making an access panel with a hinge and a small trunk for tools above the gas tank. the nice part about the way the frame was built and the use irs is that the rear floor board will only need to come up about two inches. but what an undertaking. word to the wise. i will never use an irs from a lincoln again. notching the frame and installing a four link,in the long run is alot cheaper and easier. although it will ride very smooth. i also found out today my rear end gear ratio is a 3.27 with limited slip. i was hoping in had a tracpac posi