Re: 63 Chevy SWB converting to 4x4
I had a hard time getting the inner pedal bracket where I needed it to be for the column .I ended up cutting the end off, I then drilled new holes so the column would slide down so I don't have to change the length of it to bolt right on to the steering gear,next I made a couple of straps to go from the column mounting bolts to the pedal bracket,I would have liked to weld them on but then you can't get the studs to slide through the firewall and I want to be able to remove the bracket if I need to. Then I sprayed it after cleaning off the surface rust.
|