[6DoF]

got back to some parts manufacturing though too. made the 10 seat belt nut washers to hold the lab and shoulder belt brackets. i guess i didn't need to do that til the cab is back on the chassis, but i was enjoying welding. got a bunch of bracket tabs made for future proofing the chassis to run hoses n wires with. lined a few down each side of the frame in case i ever want to bolt anything on later. and the heat exchanger cage and mounts are almost ready to weld in. the cage is done, the mounting tubes have been capped with captured nuts, just need to cut the tubes to length and glue em in. after that's mounted i want some ziptie tabs and call it ready for paint.