Re: 1947 Panel Truck Frame swap with ’88 k2500
Little progress has been made since last week, but a little progress each week will get the job done. Fuel tank removed and exhaust cut. I have been researching how to use the stock instrument cluster and speedometer. I took the instrument cluster to hook it up to my ’90 chevy so I’ll have that working when this project is ready. I may be able to replace the 40 tooth reluctor in the transfer case tailhousing with a mechanical speedometer drive, and use a mechanical to electric pass through adapter for the DRAC. I’ll either build my own DRAC, or get one from a ’91-’94 truck. The ’88 DRAC is integrated in the display pcb…
|