[joeelutz]

Originally Posted by 68 TT

There is something close that can work with the D52 calipers as well as any other caliper designed for 1.25" thick rotors like the LS1 Camaro & C4/C5 Vette PBR front calipers. The 65-82 Corvette rear rotors are 11.75x1.25 and use a drum brake parking brake inside the rotors. Only down side is they are 5 on 4-3/4" bolt pattern but they can be drilled for a second 5 on 5 pattern to work on our trucks.

They fit with 15" rally wheels and you can get all the e-brake parts made from stainless steel from the Vette restoration places pretty cheap.

You can get the backing plate parts from a JL-8 optioned 4-wheel disc 69 Camaro application that fit up easier to a straight rear axle vs. the Vette parts designed for their IRS but the parts are pretty pricey. I have been tinkering around with some inexpensive ways of using the parking brake parts with a fabricated backing plate for the standard rear axle but haven't had the time to test it out and I don't have all the e-brake parts to make it functional.

NAPA sells the American made Vette rotors for under $40 too.

Interesting.
Great info. Thanks.