|
Re: 67 C10. 3/5 drop question
Quote:
Originally Posted by DNGR
Thank you, So a larger wheel may help as I go lower.
|
Yes (when using lowering blocks =/>2").
If a 15" tire goes flat but stays on the wheel w/1.5" blocks, it will still roll depending on the thread extended after the nut under the arm that secures the axle tube. It will also likely make some contact & damage the threads @ the end.
Beyond that 1.5", those U-bolt ends are making contact. Larger diameter wheels simply increase the scrub-line dimension allowing use of taller blocks w/o issue.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|