The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - LMC Heavy Duty Headlight Harness Water in Relay

**Rich72C10** · 09-22-2021, 01:08 PM

agreed, these aren't water tight at all. When I installed the harness, I wrapped all the plugs with electrical tape but I didn't do anything to the relays themselves. I didn't think the relay's themselves would get water in them. These should be water tight, IMO.

I am sealing these original relays with Epoxy 2-part glue. Unless the cover is compromised, no water is getting into them now. I'll keep the replacements (will also be sealed with epoxy by me) as spares.

09-22-2021, 01:08 PM	#8
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,643	Re: LMC Heavy Duty Headlight Harness Water in Relay agreed, these aren't water tight at all. When I installed the harness, I wrapped all the plugs with electrical tape but I didn't do anything to the relays themselves. I didn't think the relay's themselves would get water in them. These should be water tight, IMO. I am sealing these original relays with Epoxy 2-part glue. Unless the cover is compromised, no water is getting into them now. I'll keep the replacements (will also be sealed with epoxy by me) as spares. __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim