The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Hooker Blackheart 1967-72 C10 Truck LS/LT Swap System Info Thread

LS short box · 03-27-2021, 05:06 PM

When I did my C10 I used mandrel bends from Summit. I try guesstimate the number needed but here in MN they have mandrel bends at the local Fleet Farm store. NAPA has them also. Dyno Max turbo mufflers. 3" at the header collector reduced to 2.5". I use band clamps not the typical muffler clamps. I typically start at the header and work my way to the end of the vehicle.

03-27-2021, 05:06 PM	#176
LS short box Registered User Join Date: Jun 2015 Location: Carlos MN Posts: 1,922	Re: Hooker Blackheart 1967-72 C10 Truck LS/LT Swap System Info Thread When I did my C10 I used mandrel bends from Summit. I try guesstimate the number needed but here in MN they have mandrel bends at the local Fleet Farm store. NAPA has them also. Dyno Max turbo mufflers. 3" at the header collector reduced to 2.5". I use band clamps not the typical muffler clamps. I typically start at the header and work my way to the end of the vehicle.