The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Ghost's68 · 04-01-2021, 11:18 AM

Thanks guys for the help. I was able to determine I suck at math and that electrical is not my strong suit. I ran a 10g power feed to the panel but the problem was the amperage. To much amps for the size power wire. Replaced my fuse panel and upgraded power and ground to 4g and everything is happy again. Also ran power straight to battery.

04-01-2021, 11:18 AM	#4
Ghost's68 Registered User Join Date: Jun 2016 Location: American Canyon, CA Posts: 253	Re: Melted relay panel + post toasty Thanks guys for the help. I was able to determine I suck at math and that electrical is not my strong suit. I ran a 10g power feed to the panel but the problem was the amperage. To much amps for the size power wire. Replaced my fuse panel and upgraded power and ground to 4g and everything is happy again. Also ran power straight to battery.