The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Will the bell housing from a I6 fit a 350

bhoeger70 · 12-18-2009, 09:12 PM

If it is a two piece rear main seal on the 350 everything will work even the radiator.Tto use a radiator shroud you will need to use one for a 4X4 because the engine sits back a few inches when you bolt it up to the 6cyl mounts. If I remember right you will also need to modify the ball stud for the clutch linkage some but it is not much, or hard to do.

12-18-2009, 09:12 PM	#5
bhoeger70 Registered User Join Date: Sep 2007 Location: Grand Forks ND Posts: 434	Re: Will the bell housing from a I6 fit a 350 If it is a two piece rear main seal on the 350 everything will work even the radiator.Tto use a radiator shroud you will need to use one for a 4X4 because the engine sits back a few inches when you bolt it up to the 6cyl mounts. If I remember right you will also need to modify the ball stud for the clutch linkage some but it is not much, or hard to do. __________________ "Beer is proof that God loves us and wants us to be happy" Ben Franklin 67 Chevy 1/2 lwb, 67 GMC 1/2 lwb (parts) Last edited by bhoeger70; 12-18-2009 at 09:22 PM.