[69 C10 LWB]

Last weekend I didn't get much work done. I cut the old hitch off which took way longer than it should have. Farmer John welded a cutting edge from a bucket across the frame rails and then welded a piece of 1/4 in angle iron on top of that. I tried using a plasma cutter to hack it off but due to co worker abuse it wasnt working at 100%. I ended up using a cut off wheel to get inside the frame and cut where it was welded to the sides. Then 2 hours with an 4in grinder to get rid of the rest of the welds and the frame is almost back to normal. I also spent some time re bleeding the brakes because I have a wheel cylinder leaking and the master cylinder ran dry.