The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

95 S_Trucker · 03-11-2015, 02:09 PM

You should have a NP208 Transfer case

If you have an OE style Y-Pipe, it will hit your front drive shaft.

Your rear drive shaft may work just fine, or it may be too short. Hit and miss with these trucks. Some of the lift springs move the rear axle forward to compensate. Some do not. You wont know until you have every thing put together.

On my 6" lift, the rear shaft was just fine. Plenty of the yoke was still in the transfer case.

03-11-2015, 02:09 PM	#3
95 S_Trucker Registered User Join Date: Oct 2009 Location: . Posts: 2,179	Re: 6 inch lift kit help!! You should have a NP208 Transfer case If you have an OE style Y-Pipe, it will hit your front drive shaft. Your rear drive shaft may work just fine, or it may be too short. Hit and miss with these trucks. Some of the lift springs move the rear axle forward to compensate. Some do not. You wont know until you have every thing put together. On my 6" lift, the rear shaft was just fine. Plenty of the yoke was still in the transfer case.